Moisture Meter for Plastics
The water content of High - Tech plastic material has a great influence on the quality of the finished product. The test should be made swiftly on an instrument having a simple test procedure.
Ranges
With the AQUATRAC® - 3E different ranges are obtained by different sample weights. AQUATRAC® - 3E is able to detect even the most minute traces of moisture (less than 0.01 % H2O) in large, representative testing samples (up to 100 g). In the case of lower-weight samples, the measuring range can be increased to detect very high degrees of moisture. Since AQUATRAC® - 3E is now able to achieve ultra-precise readings using a single measuring cup, it is no longer necessary to switch from one measuring cup to another.
Download brochure(s):
AQUATRAC-3E
- THERMOPLASTICS, E.G.
- DUROPLASTICS, E.G.
- ELASTOMERS, E.G.:
Measuring principle Chemical reaction with calcium hydride Sample weight 0.1 g - 100 g according to range Test temperature 80° C - 200° C in 1° C steps Accuracy
Measurement accuracy:
Reproductibility:+2% of reading
+1% of range
approx. + 1% of readingMessbereiche smaller 0.1 %
0.1 % - 0.5 %
bigger 0.5 %Test time 10 - 45 min. dependent on material Display % H2O or ppm Power supply 100 - 230 V (50/60 Hz, 450 W) / dependent on version Dimensions (w x d x h) 51 cm x 32.5 cm x 23 cm Weight 13.0 kg / 14.8 kg